Back to Top

Panasonic TV Repair

San Antonio's Panasonic TV repair experts. Panasonic might be the best quality to price TV on the market. They have outstanding quality screens and can compete with the prices of some of the cheaper brands. They are all-around high quality TV sets and their repairs are almost always lower than other brands.

Common Panasonic Repairs We Are Seeing

Model Problem
TH-42PZ80U/A Shuts down with 10 blinks.
TC-P50PU54,TC-P50U50, TC-P50UT50 Eight blinks
SA-HT940 Shuts down immediately. Displays 'Error'
TH-58PX60U immediate shutdown...
TC-P50UT50 8 blinks
TH50PZ85U 2 blinks
TH50PX77U 10 blink when power pushed
TCP54S2 3" colored band across top
TCP54S2 won't fully power up
TCP50G10 dead, no standby, no lights
TC-P46X3 Dead, wont click when power applied.
TCP50UT50 TCP50U50 Shut down 8 blinks
TH42PZ77U 10 Blinks after pressing the power button.
TH42PX75U No power no LED
TH46PZ85U Power indicator flashes 10 times at plug-in. No start-up.
DMRES45V Can't operate with remote, OK with front controls.
DP50710 Attempt to start repeatedly. At each cycle a relay clicks, the power indicator comes on solid green for about 30 sec, goes briefly off and the cycle repeats.
TCP50ST30 High pitched noise from back of set, also a pop on turn on part time
TCP42C1 One blink code after turn on
TCP60S30UA Six blinks.
TH42PZ80U 2 blinks
TH50PZ80U Dead 10 blinck
TCP50X3 dead
TH37PX25 Picture is shifted and wrapped around horizontally as if out of phase, for component inputs and tuner sub-channels like 2-2, 7-4, etc. he picture is normal for video or tuner main channels.
TC42PX24 7 blinks
TC32LX85 SHUTS DOWN OR WILL NOT START
TH42PX75U No picture (intermittent) sound OK
TH42PZ700U SHUT DOWN 10 BLINKS
TH58PX60 Dead
TH50PZ80U Immediate shutdown - 10 blinks.
TCP42X1 Shut down 9 blinks - blinks nine
TH42PA20 AT POWER UP RELAY WOULD CLICK DID NOT POWER UP 12 BLINKS
TCP50G15 Set won't come on 3 Blinks of LED
TH42PD50U Shuts down 10 blinks.
TCP50S1 Won't Turn on - 10 Blinks
TH50PX60U Shutdown 7 blinks
SABT100 Dead
TH-42PZ80U shuts down, '7' blinks
DMRE85HP Dead set.
TCP50X1 Tries to power up then goes into shut down 10 blinkes
CT36SL13G Relay continually clicks
TCP50S2 Clicks at power-on, no raster; clicks, shuts down, 7 blinks.
TH50PZ80UA Dead - 2 blinks,later 6 blinks.
TH42PX50 Just clicks, no power.
TH42PX75U Set came in dead with blown AC fuse
CT36G34A Wrong shades of colors.
PT45LC12 Jail bars in picture
TH42PD60U DEAD,Fuses in power supply both blown
TC54S14 WILL NOT TURN ON
TCP50S1 WIll not turn on.
TH50PZ85U Shutsdown & Blinks 11 times
TH42PZ77U DEAD, 10 BLINKS
TC37LZ800 Dark shading at middle of the screen.
TH42PZ77U Shutsdown 3 seconds after video comes on & blinks 10x
TC37LZ800 No signal display,video or audio. Menu OK.
TH37PX60U Right side of panel 3 inches has vertical colour bars.
TH42PX60U DEAD- 9 Blinks
PT50LC14 Lamp will not light.
DMRE85H Dead
TH42PX60U Dead, 9 blinks.
PT50DL54J Shuts down whenever it feels like it
PT47WX345 Will not power up
CT27E131G Unstable picture size, "lines" in picture, sound OK.
PT50DL54J Shut-Down, power led blinking.
PT53TW53 5 blinks
CT35G25B DEAD SET
TH46PZ80UA, TH50PZ80UA, TH50PZ800UA Relay clicks than shut-down 2 blinks.
PV9450 Jams tape.
PT53WX53G Immediate sut down, 3-flash error code (convergence).
TUPT700U Will not work composite video
PT51DX80A Bad convergence.
TH42XVS30 DEAD
CT27G11U Turns on or shuts off intermittently.
PVD4734S Dead set.
PVL671D No LCD display.
TH46PZ85U Int. shut down
PVV402 Tape not going all the way down before it goes into play
CT32G31U Rattling or buzzing noise (int.)
TH46PZ80U Unit will power up correctly without any blinks code, the screen seems to ligth up but no image neither sound.
THC50HD18 10 BLINKS CODE
TC50PX14 7 Blinks
TC50PS14 5 BLINKS
TH58PZ800U Dead, black screen & no audio. Power led light up.
TH42PZ80UA Dead 10 Binks
CTP2764S Dead set.
PVC2021 Dead set, stuck tape.
TH46PZ80U Dead 7 Blinks
CT36SX12F (UF) (CF) Won't come on intermittently
TH42PX75U 5 Blinks
TH42PZ80UA Dead
CT32SX31CE Raster & audio present no video
CT32SX31CE Pin Cushion problem
CT32HC14J Dead set.
ct36sx31e tv had hum in the speakers an the tv was slow to power up
PT51G42 Powers up for a second or so than shut down.
TH42PZ700U Will not power up - 7 Blinks
TH42PZ77 Dead 7 blinks
PT61LCX35 Colored spots AND had video error similar to solarization but with green outlines wherever colors transitioned from one shade to another.
PVD4734S Dead
PT61LCX65K Screen has only 1 colour -RED.
CT32G14A Dead set with buzz noise.
CT36SL14G No video & audio also power led does not light up but screen light up with retrace lines..
TH42PA20U-P Analog Channels 20 to 39 missing.
CT27SL15 Retrace lines on top of screen
PT47WXC43G WHEN SET IS TURN ON SET SHUTS DOWN WITH THREE BLINKS
PVD734S DVD section not functional, stuck DVD. VCR section OK.
T20000BK Shuts off after a few seconds and/or jams tape when ejecting, intermittent.
PVQ2512(TV/VCR combo) Rejects cassette.
CT32D31 turns on & off byitself
SE5808(Receiver/Turntable/8-track) Intermittent audio output. Tapping effects.
CT36D32F Dead set, "POWER" button not functional, "VIDEO IN" front jack damaged.
TH42PX60 dead 10 blinks
PT47WXD64J DEAD
TH42PA20U-P VIDEO WASH-OUT
TH37PA20U-P Dead-- 12 Blinks, stop 12 Blinks. on & on.
TH42PZ77U Shuts down with 10 blink error code.
TC32LX70U SHUT-DOWN , POWER GOES OFF TOO
CT20SL15 1 inch vert deflection
TH37PX50U After warm up 10 to 20 minutes lines in picture and picture starts shaking up and down
PT51HX42F Bad convergence, especially at the bottom.
TH42PX50U Stripes / Bars
CT27D31E Tuner inop
TH42PX60U 10 BLINK ERROR
CT32G6E No start or intermittent or no start. May start and run a few minutes then cut off
PVM2021H Remote control won't function.
PT50DL54J POWER KEEP BLINKING
PT53WX52F Convergence problem, some user adjustments possible.
NVHV60 Totaly dead. No readout No responce to power key This is a multi-system PAL NTSC SECAM Etc. machine
PVDF2035 Dead
CT2701G dead
CT35G25B Dead - no standby 5v
TH42PX75U unit does not recognize any input signals, might recognize parcial digital signals through tuner input.
CT32D31E Poor Vertical Deflection
TC32LX70U SET POWERS UP THEN SHUT-DOWN.
SAHT70(Receiver/DVD combo) Can't read disk, DVD or CD.
CT32G24A 1. Colors messed up, no degaussing. 2. Geometry problems, horizontal width and PCC.
CT25G7F Dead
CT32HL42 clicks on and shuts down
PT52LCX35 Gray scale is 'choppy' and color has a severe solarized appearance.
DMRE75VP(DVD/VCR combo) Can't play DVD or CD, displays "can't read", VCR section OK.
SAHE200 Intermittent "OVERLOAD" when hot
PT61LCX35 Colored spots the size of tennis balls( FUZZY SPOTS) throughout the screen.
TH50PZ700U Will not start. LED blinks 7 times
TH58PX60U DEAD - 10 BLINKS
TH58PZ700U Dead. No 5v standby voltage.
PT56LCZ70 Set would try to start 3 times than shut off with lamp led 2 flashes.
TC20LA2D No Power
CT32G14A Sound fades in and out
CT32G14A HOT overheats (no pun intended) and shorts out.
PT51HX41E Dead, Relay clicks no LED
THM50HD18 Will not start. LED blinks 8 times. Originally TV would play about 15 minutes then shut off with LED blinking 8 times.
CT27G12V Dead Set
TH42PZ80U Dead. LED blinks 2 times.
CT27SL14J Dead set
ST50PX20 tuner shows on low channels and snowy.......
PT47WX53 R17 burnt and shuts down
CT32E13G No Sound
TH42PZ77 DEAD, 7 BLINKS
THC42FD18 Black stripe from top to bottom of screen
TH42PD50 VIDEO DISTORTED
TH42PX50 AFTER DEPRESSING POWER BUTTON, UNIT SHUT-DOWN, POWER LED BLINKS 7X
PDP 2007 MODELS SERVICE HINTS
TH42PX75U DEAD
CT36D11E dead +++narrow picture on both sides +++ vertical retrace lines about one quarter from top and vert. jumping.
CT30WX54J had audio and high voltage but crt heaters not lighting
CT34WX54J no functions by remote
PT53TW53G Dead set
CT36HX42F relay clicked on an off
PT51G36E NO OSD, OR VIDEO AUDIO OK.
CT27SC13G dead and fuse is blown
CT21SF2 GOOD SOUND BUT INTERMITTENT PICTURE ON & OFF WITH TAPPING EFFECTS
TH42PX75U Dead with 10 blink error code.
CT32HL42F Dead
CT36HX42F After replacing H.O.T it runs hot and fails in afew days
TH42PW5 shuttoff blink two tima red led
CT32HXC43 dead set .....blinks 4 times
PT53WX54J Bad convergence
CT27G31 Has raspy audio when using the tuner
CT36D11E vertical jitters
TH50PX25 Shutdown with 12 Blinks
CT36G24A Poor video, not smooth, grated appearence like rows of plowed field running top to bottom and jaggered and no color.
CT36SX31E Bowed in on sides Pincushion circuit
CT27G24A Picture bounces or collapses vertically, tapping effects, intermittent.
PVDF2703 Shutdown at turn on
th42pd60u distorted audio
PT45LC12 dead - power led blinking Lamp not lighting
PT53WX53G SET POWERS UP THAN SHUT DOWN
ct36d11E vertical jitters
pvm2037 low audio on tv problem vcr ok tv low on audio
PT51G53W picture expands verticaly looks like verticale problem
TH50PX60U would power up and screen would try to come up then shut down and flashing red light
PT-51G44A snowy poor reception ; also raster becomes too large
pt-47wxc43g screen dark; has sound and high voltage. dim narrow picture can be seen looking into the projection tubes
TH42PHD8UK shut down with standby indicating 2 (off) blinks
PT51G44A Vertical has over scan on certain channels and under scan on others. Picture also is real dark on some channels.
ct-205l14j arcing between pins 4 and 5 then goes dead
pt50lc13 shutdown led blinks
ct36sx31ce shutsdown immediatley
TH42PA20 DEAD/SHUTS DOWN MAY POWER UP IF UNPLUGGED AND RE-POWER UP
PT47WX42F Horizontal lines in picture after changing convergence chips and resistors. Looks almost like a PS flutter

Go to Panasonic's Official Customer Support for your product manuals and information.